VISIONETICS INTERNATIONAL

VIGA VGA+

Card Type                    Video card
Video Chip Set               Tseng Labs
Maximum Video Memory         1MB DRAM
Video Types Supported        XVGA
Highest Resolution Supported 1024 x 768
Data Bus                     16-bit ISA
Formats Supported            NTSC, PAL


[Image]

                                CONNECTIONS

        Function           Label              Function             Label

  Composite video out        J1     Composite video/RGB/sync out     P2

  S-video out                J2     15-pin analog video port         P3

                        USER CONFIGURABLE SETTINGS

                 Function                     Label         Position

  »   VGA enabled                              S1/6            Off

      VGA disabled                             S1/6            On

  »   Factory configured - do not alter        S1/7            Off

  »   IRQ 9/2 enabled                          S1/8            On

      IRQ 9/2 disabled                         S1/8            Off

                     DRAM CONFIGURATION

             Size                         Bank 0

             1MB                       (8) 256 x 4

            Note:Location of memory bank is unidentified.

                        BASE I/O ADDRESS SELECTION

    Setting         S1/1       S1/2        S1/3        S1/4       S1/5

        200h         On         On          On          On         On

        210h         On         On          On          On         Off

        220h         On         On          On         Off         On

  »     230h         On         On          On         Off         Off

        240h         On         On          Off         On         On

        3B0h        Off         Off         On         Off         Off

        3C0h        Off         Off         Off         On         On

        3D0h        Off         Off         Off         On         Off

        3E0h        Off         Off         Off        Off         On

        3F0h        Off         Off         Off        Off         Off

                                   Note:

  A total of 32 base address settings are available. The switches are a
  binary representation of the decimal memory addresses. S1/1 is the Most
  Significant Bit and switch S1/5 is the Least Significant Bit. The
  switches have the following decimal values: S1/5=16, S1/4=32, S1/3=64,
  S1/2=128, S1/1=256. Turn off the switches and add the values of the
  switches + 512, to obtain the correct memory address. (Off=1, On=0)